The hot summers and chilly winters have ushered in the HVAC tune up season. Purchasing an HVAC system is a significant investment, and you don’t want to make the incorrect choice for your house – but how do you know which heating and cooling system is best for you?
A central house HVAC system like Amana air conditioner offers cooling for a building’s complete interior. Depending on the type of central heating system you have, the generated heat is distributed throughout the house via a network of ducts or pipes.
Central heating systems are divided into
- Heat Pumps
Furnaces for central heating
- Furnaces heat air in one place and transport it throughout the home via a system of ducts and vents using gas, electricity, or fuel oil.
- Through the vents, the combustion gases are vented out of your home.
- Furnaces are known for their superior efficiency, extended lifespan, minimal operating noise, affordability, and indoor air quality, among other things.
Types of furnaces:
- Gas furnaces
With the use of a burner, gas is sprayed out to generate hot combustion gas, which raises the temperature of the air. Through the ducts and vents, the warm air is cycled.
- Oil furnaces
Oil is used to heat the air, distributed through ducts and vents. Because they require oil as a fuel, they are not cost-effective.
- Electric furnaces
If you don’t have access to natural gas, you may use electric furnaces to heat your home throughout the winter. Electric heating components, such as metal, are used in these furnaces to provide heat circulated in the air. They are less costly and smaller than other furnace kinds.
- Modulating furnaces
These furnaces are more expensive than others. A modulating furnace adjusts the amount of gas it burns to reach the desired temperature. It allows you to identify the temperature precisely. These systems do not waste energy by turning on and off often.
Boilers for central heating
- Boilers are water heaters with a specific purpose. Gas or additional natural fuels are utilized to power boilers used by residential consumers.
- Valves in boilers control water flow and temperature.
- The boilers’ heat is spread evenly throughout the home. For your home, you should opt for a high-efficiency boiler.
Heat pumps for central heating
- Heat pumps are capable of providing year-round climate control. With the help of an electric system, they keep your house cool in the summer and warm in the winter.
- Heat pumps are more energy-efficient since they use electricity to transport rather than generate it.
Systems for direct heating
The traditional method of obtaining heat directly from the heat source is the direct heat system. To keep your house warm, you don’t need a maze of ducts and vents or an exterior unit. Because of its low heating output, this system is ideal for a small area or room.
The following are examples of direct heating systems:
Gas-fired space heaters
- They are ductless, free-standing, floor furnaces that do not require ducting or outside units. These heaters use natural gas, propane, or kerosene.
- These are little portable heaters that may warm a single room.
- They are simple to install without the assistance of an expert, and that’s why they are less expensive.
- Manually operated, they pose fewer safety risks than unvented gas-fired heaters.
Gas-fired heaters with no vents
- These heaters have no vents and are exceedingly unsafe to operate.
- For decades, these traditional heaters have been used and marketed.
- Due to the health and safety risks, professionals advise against using such heaters.
- Such gas heaters may suffocate a room if there isn’t an appropriate ventilation system in place. It is critical to keep them close to a window.
There are three different types of equipment and efficiency ratings to be aware of:
- SEER – Seasonal Energy Efficiency Ratio
This rating determines how efficient heat pumps and air conditioners are. A higher rating means the system consumes less energy. The most efficient brands like Amana air conditioner receive a score of 22+. Energy Stars are applied to air conditioners and heat pumps with a rating of 14 or above.
- Average Fuel Utilization Efficiency (AFUE)
This is the industry standard measurement for determining the efficiency of oil- and gas-fired furnaces. A high grade indicates that the heating system is more efficient. Choose a furnace with an annual fuel utilization efficiency (AFUE) of at least 78 percent. The most efficient furnaces have a 98.5 percent efficiency rating.
- Heating Seasonal Performance Factor (HSPF)
It is a statistic that determines how energy-efficient heat pumps are. A higher HSPF rating means your heat pump consumes less energy, making it more energy-efficient. Heat pumps with an Energy Star rating of 8.2 or above have an Energy Star sticker to show how efficient they are.
What makes Amana HVAC so special?
There are a sea of options to pick from. Amana Heating and Air conditioners, gas furnaces, heat pumps, air handlers, and coils are among the Amana brand’s household energy-efficient products, completely developed, produced, and assembled in the United States.
Some units have a SEER rating of up to 24.5 and come with various fan motors, including multi-speed and variable-speed motors. Amana’s air conditioners and heat pumps use the chlorine-free R-410A refrigerant, which comes with a special guarantee.
They have the most comprehensive limited warranty of any brand’s air conditioners and heat pumps. Amana will replace the air conditioner or heat pump at no cost if the original registered owner has a compressor failure.
Extended service: The Asure Extended Service Agreement from Amana will provide you with years of worry-free relaxation. The size and age of your home and the climate will all impact the system you choose. What works best for one homeowner might not work for the next. To identify the greatest comfort alternatives for your house, book a consultation.